There is no better to customise your walls than by Doing It Yourself. I just love painting on walls. Each section of my room is painted in a different way. The general wall paints and wallpapers are so boring. If you opt for getting any artistic wall done by the paint guys it not personalised, the wall still comes from an assembly line! The designs are fixed you have to choose a design from a book and the painting fella will just replicate every inch of it. Not to mention the crazy ass pricing of such walls. By Doing It Yourself you can customise each room, each wall and even a section of the wall and convert the whole room into a masterpiece.
Here is something I did to cover up a column in my room. This column is about a foot wide and 7ft tall and is stuck between my wardrobe and window.
My little piece of Taj Mahal
It is my own piece of Taj Mahal :-). The best thing about this design is, it feels intricate to the viewer, but it isn’t. Well it is intricate drawing and painting but the diffculty level is not that of an intricate painting. If you have seen the above picture then you have seen the rest of my column. It is sheer simplicity.
Things you need:
- Eraser (if required)
- Paints – I used poster paints coz i had them at home. I always recommend using things lying around than buying new ones. You can use any kind of paints. Enamel paint is recommended because you can wipe and clean the painting with wet cloth. Poster paints are water soluable.
- Different shades of green crayons – Plastic or wax
- Mirror pieces
- Round paint brush size 0, 1 and 2
- Creativity 🙂
- Use the pencil to create waves, intertwined intricate short waves ending with arcs. These waves should be random and not in a pattern. If you draw them in patterns then it will look like a tiled image! [Note] Use the pencil very very lightly. Lightness of hand while doing any art work is most crucial. Also because it is difficult to erase on a distempered wall. The eraser leaves a mark. The drawing is a skeleton. It should not be used as a stencil drawing to paint on.
- Again randomly draw leaves anywhere and everywhere you feel like.
- Draw flowers. You can google ‘sketch flower’ and you will get innumerable sketches of flowers. Take your pick. If you can fill in the colours perfectly then you can go for an inticate design on the contrary you can stay with a simple sketch.
- Start Painting. Use the zero size brush and basic green paint (i prefer a mixture of light green and a dab of dark green). Trace out the waves and arcs.
- Use size 1 brush and paint the leaves.
- Paint the flowers with your favourite colours using zero and 2 size brush.
- Leave it to dry. The drying time will depend upon the type of paint used. Poster paints dry faster than enamel paints.
- Use different shades of green crayon and shade around the waves and leaves. It gives a feeling of depth.
- Use fevibond and stick mirror pieces randomly. I preferred to stick them in the middle of the flowers.
Viola! Your very own piece of Taj Mahal is ready!
A chocolate cake craving can attack at any time. And we all know that such a craving has to be satisfied at any cost. This recipe is for beginners and moody bakers who like me, don’t bother to acquire all the necessary tools of the craft but try to manage along with whatever is available at hand. Actually this cake cannot be made within 5 minutes the first time. But can be made in less than 5 minutes the second time, it takes a little practice.
Measurement: I don’t have those spoons and cups that are available in the market. Moreover I don’t believe in cooking by measuring 5ml or 2 drops and 1 pinch.. I put in ingredients by instinct 🙂 Cooking is not chemistry its love for food. So if your using a spoon or cup, it could be of any size, just make sure that you use the same spoon/cup to measure all other ingredients. If you heap the spoon/cup for a ingredient, measure others also the same way.
- 2 spoons- all purpose flour (maida)
- 4 spoons- chocolate powder (you can use drinking chocolate, molten chocolate bar)
- 5 spoons- oil (any cooking oil)
- 3-4 spoons- powdered sugar (it will depend upon whether you chocolate is sweetened or plain)
- 1/2 spoon- instant coffee powder
- 3 spoons- milk
- 1- egg
- pinch – baking soda
- pinch – baking powder
- Sieve together maida, chocolate powder, baking soda, baking powder, coffee and sugar powder. If you are using molten chocolate bar then it can be added later on.
- Repeat it again. This helps in incorporating the dry ingredients together.
- Beat egg in a bowl for 1min. The more stiffer you beat the egg more better it is for the cake. Don’t worry if you don’t have one of those electric beaters, spoon works fine.
- Mix oil into the egg and beat again for 1min.
- Mix milk in the oil and egg mixture. If you are using molten chocolate then add that also to the liquid mixture.
- Slowly mix the liquids into the flour mix while stirring to mix it in.
- Once all the liquid has been incorporated, check the consistency. It should not be too thick. If you feel it is thick you can add some milk.
- Coat your vessel with oil and dust it with a little maida.
- Pour your cake mix into the vessel.
- Microwave for 2-3 minutes.
- Pierce the cake with a tooth pick or a knife. If it comes out clean then it is ready to be served.
Chocolate cake in a Coffee Mug
Instant microwave chocolate
Its nice to make a pen stand as you can keep it on your desk and use it everyday. Something to keep reminding you of your hidden creativity.
- Cardboard cylinder inside of cellotape.
- Fevibond or any other rubber based adhesive.
- Plastic circular base. This is found in any electrical shop. Ask for plastic bulb holder base. You can also use a self made base of wood, cardboard, hardboard or any other material.
- Paints/Sketch Pens/Crayons/collage material..
- creativity 🙂
- Essential point of doing any craft item is to clean all the items. Dust is not good for health and art. Wash hands and dust all the materials. No glue will stick on dust.
- Take the cardboard cylinder. Note: The width of the cardboard cylinder will depend upon the width of the cellotape. You can either use several short ones or a big one, its your call. Thats the beauty of Doing It Yourself. The general height of a pen stand is 4-5inches. So you can stick the cardboard cylinders till this height is achieved using fevibond.
- Wait till the cardboard is dry and strong.
- Apply fevibond along the base of the cardboard cylinder and along the edge of the plastic base and stick them together and let it dry.
- Viola! Your pen stand is ready.
- Now it needs to be decorated.
- Paint the whole thing in 1 solid color.
- Draw cartoons, motifs and patterns.
- Stick colorful bits of paper to form a collage. If you are sticking paper then it will need a coat of varnish after the collage dries. You can also use clear nail paint if you don’t want to buy varnish.
I got my friends to autograph mine…